Drums

Heavy-duty percussion mount which clamps on a bass drum counter hoop. Provides 9.5mm knurled post for mounting bells, blocks, and other percussion instruments.

Protects lacquer bass drum hoops from bass pedal hoop clamp. 2 pk

4-3/16" (106mm) long x 6mm dia. 4 pk.

4-3/16" (106mm) long x 7/32" dia. 4 pk

Similar in function to the SC-18BDPM, the new SC-BDPM fits 18" and 20" bass drums.

4-1/4" (108mm) long x 6mm dia. 4 pk.

4-1/4" (108mm) long x 7/32" dia. 4 pk.

A 2-1/4" wide felt strip mounts inside drum head. Fits up to 26" drum. 2 pk.

Economical version of SC-4425G without hinged clamps.

Allows cymbal arm to be mounted in ball arm socket. Can be used on Gibraltar or other manufactor’s L-rod platform mounts.

Adhesive felt pad mounts on drum head. 4 pk

Leather-like vinyl pad mounts to drum head. 4 pk.

Suede pad to protect bass drum head. 4 pk.

A set of simple and lightweight spurs. Solid steel rod with rubber tips mount into cast receptacles.

Telescopic bass drum spurs. Angle-adjustable bracket is included. 1 pr.

The top section of 9516 Deluxe Bongo Stand. Allows sturdy mounting of bongos to rack systems or double conga stands. Fits 1/2" to 1-1/2" dia. bars.

Fits most bass drum beaters. 2 pk.

Attaches to SC-AM one or four accessory mounts for adding accent cymbals.

Allows mounting of most brands of cowbells, blocks or tambourines to an adjustable floor stand, which also accepts most brands of bass pedals.

The same boom assembly as the SC-4425B-1 with smooth boom arm. Makes quick position adjustments easier.

4 pk. Felts - Large 1-1/2" Thick

4 pack.

4 pack.

4 pack.

Heavy-duty ratchet assembly with a 1/2" socket which fits most manufacturers’ congas and bongos for easy, accurate tuning.

Allows a hand-held cabasa to be placed in a padded holder for easy access. Cabasa can also be played while being held in mount. Fits on 1/2" to 1-1/2" dia. tubes.

Cymbal holder with heavy-duty tilter assembly and 8mm wing screw. Mounts on 9.5mm shaft. Fits on SC-4425D-1, 170, GAB-20, DTM, AM-1, AM-4 and BDHC.

Allows two cymbals (of any size) to be placed on top of each other with approximately 8" of clearance between them. Mounts on most 6mm and 8mm cymbal stand tops. (No special screws or mounting pieces required.)

Disengage and drop top cymbal by hitting clutch with drumstick. Step on the pedal and clutch attaches itself at original position. (8mm rods)

Double L-rod platform with 1" dia. vertical post (for double tom mounting).

Double L-rod platform with adjustable multi clamp. (Multi- clamp fits up to 1" dia. post.)

The same material used on our SC-BPL for use with double pedals. 2 pk.

Bass Drum Pedal Beaters Hardened steel rods with a flat side to prevent slipping.

Bass Drum Pedal Beaters Hardened steel rods with a flat side to prevent slipping.

Fits 6", 8" or 10" Toca mini timbales and holds two cowbells, wood blocks, etc. Clamps onto existing stand via rack style cast multi-clamp fitting. Fits 1/2" to 1-1/4" dia. stands.

This super L-Rod fits D.W., Gibraltar and some other manufacturers’ L-Rod tom tom brackets.

Universal extension arm with 360° ratchet plus a multi-clamp attachment. Allows infinite positioning for almost any piece of drum hardware. (1" dia. tube)

Wing nut, washer and bolt set fits 9.5mm to 10.5mm shafts. 2 pk.

Locking caster that fits 9500 Series Gibraltar cymbal stand. 1 pk.

Straight cymbal arm mounted to a geared ratchet adjustment and attached to a basic grabber clamp (SC-BGC).

Perfect for use on hi-hat and bass drum pedals to protect bearings and eliminate squeaks. 1 oz. Bottle

1-1/2" dia. chrome steel tubes with plastic end caps.

1-1/2" dia. chrome steel tubes with plastic end caps.

1-1/2" dia. chrome steel tubes with plastic end caps.

1-1/2" dia. chrome steel tubes with plastic end caps.

1-1/2" dia. chrome steel tubes with plastic end caps.

1-1/2" dia. chrome steel tubes with plastic end caps.

1-1/2" dia. chrome steel tubes with plastic end caps.

1-1/2" dia. chrome steel tubes with plastic end caps.

1-1/2" dia. chrome steel tubes with plastic end caps.

Connects rack tube to an angled hinge. High-impact plastic.

This all-new clamp allows for many setup capabilities. Use for unique setups or for a quick tear down and fold up of important rack sections.

Connects two 1-1/2" dia. rack tubes end to end.

Universal clamp mounts to rack. Holds 5/8" to 1-1/4" dia. accessory arms.

1-1/2" dia. ensures same clamp position on rack. All metal construction. 2 pk.

Fixed 90° right angle clamp with hinged sides.

Connects vertical tubing at a 90° angle.

Specially modified SC-GPRTC designed for use with T-leg assemblies.

A grabber multi clamp with a ratchet assembly allows you to add an L-rod, straight post or wind chime arm to create a specific mounting device for your setup

Secures two tubes and allows for angle adjustment.

Similar in design to the SC-GRSRA right angle clamp. The adjustable right angle clamp allows multiple angle adjustments via a geared drum key rod/bolt assembly.

Can be added to the rack without sliding other components off.

For mounting toms, cowbells, cymbals, etc., to a standard 1-1/2" dia. rack tube.

Mini version of the SC-GRSTLA. Excellent for tight drum setups (12" long).

Allows for two position (locking) angles which helps to quicken setup and tear down of rack systems. Same clamp used on the new -350QS and 400QS Gibraltar rack systems. Primarily designed for use on horizontal bar(s) and vertical leg bars.

Fixed 90° with hinged sides.

Has a larger multi-clamp section with more gripping surface than the SC-GRSMC or similar multi-clamp. For mounting heavy items.

Allows two tubes to meet at the same horizontal angle and pivot up to 90° on a vertical leg.

The Road Series T-leg clamp is designed for maximum support and stability of 90° T-leg assemblies.

Rack T-leg assembly with Road Series T-clamp attaches to vertical tube (24" long).

4 pk.

Gibraltar’s all new “Jaw" percussion clamps are designed to provide an easy uncluttered way of mounting various percussion instruments or microphones to drums, congas, bongos and other instruments via their hoop or tension rod.

Cymbal Mount for tension rod mounting.

Gibraltar’s all new “Jaw" percussion clamps are designed to provide an easy uncluttered way of mounting various percussion instruments or microphones to drums, congas, bongos and other instruments via their hoop or tension rod.

Gibraltar’s all new “Jaw" percussion clamps are designed to provide an easy uncluttered way of mounting various percussion instruments or microphones to drums, congas, bongos and other instruments via their hoop or tension rod.

Use on congas or bongos with “Easy Play" or “Comfort Curve" LP™ hoops. Rod Clamping Jaw clamps on conga and bongo tension rods or any small diameter shaft.

These L-rods fit various manufacturer’s tom mounting systems. They can be mounted in any of the L-rod platforms with post or with clamp and in many manufacturers’ original tom mounting systems.

These L-rods fit various manufacturer’s tom mounting systems. They can be mounted in any of the L-rod platforms with post or with clamp and in many manufacturers’ original tom mounting systems.

These L-rods fit various manufacturer’s tom mounting systems. They can be mounted in any of the L-rod platforms with post or with clamp and in many manufacturers’ original tom mounting systems.

12 pack Swilve nuts fit most bass drum tension lugs (6mm dia )

12 pack Swilve nuts fit most Tom Tom tension lugs (7/32" dia. )

Tom/cowbell attachment arms fit directly in multi-clamp. 12mm x 9.5mm dia. 2 pk. (Fits SC-STL2 and SC-TL2 mounts.)

12mm x 12.7mm dia. 2 pk.

12mm x 10.5mm dia. 2 pk. (Fits SC-STL2 and SC-STL3 mounts.)

Medium Accs. Table with Mount - Attaches to a cymbal stand or rack bar. 12" x 18" with 1" high borders and padded surface.

This small boom doubles as a straight cymbal arm or a cymbal boom arm. 3/4" dia. vertical shaft.

Used on cymbal tilters. Fits 8mm 4 pk.

4 pk.

4 pk.

4 pk.