Drums

Bass Drum Pedal Beaters Hardened steel rods with a flat side to prevent slipping.

Bass Drum Pedal Beaters Hardened steel rods with a flat side to prevent slipping.

13"/12 strand.

14"/20 strand ( split 10/10 )

Hoop mount tone control device attaches to virtually any Tom Tom or Snare drum.

1/4" socket fits all standard drum tension rods.

6 Strip of Drum Keys

Crank-shaped key to speed head changes. 1/4" socket.

Snare strainer with full throw off, fine tuning adjusment with butt end and screws.

Mounts inside drum with adjustment on exterior. Exerts pressure by felt pad against head.

Attaches to the bottom of front counter hoop to prevent bass drum “walking." Dual reversible tips.

Fits Gibraltar and most professional stands. (8mm rods)

Utilizes our “Super Grip" clamping mechanism which will not scar the hi-hat pull rod. Fits 8mm rod.

Fits CB Percussion 3207 and most inexpensive stands. (6mm rods)

Fits Rock Hardware by Gibraltar and most moderately priced stands. (8mm rods).

Perfect match for the SC-4425MB. Mounts two or more items from one rack or stand multi-clamp.

7/8" dia. post with a cymbal boom arm that is unweighted, knurled and fully adjustable.

7/8" dia. post topped with an L-Rod for mounting cowbells and other accessories. L-Rod also fits some tom mounts and electronic drums. 5/16" (9.5mm) dia. L-Rod accepts most cowbells, blocks, tambourines, etc.

Double clamp assembly. Accepts 1/2" through 1" dia.

Perfect for mounting splash, small effect cymbals or bar chimes. 10" vert. shaft with 14" horiz. shaft long enough to position small cymbals but short enough to stay out of the way. Smooth cymbal arm. 7/8" dia. shaft.

Three-way clamp accepts 1/2" through 1" pipe dia.

14"/16 strand.

14"/20 Strand

16"/20 strand with extended length.

14"/20 Strand Sonor Style

14"/24 Strand

Fits Gibraltar and most professional hi-hat stands w/1" or 5/8" tube.

6 pack 2" Tension Rods.

6 pack 1-5/8" (41mm) Tension Rods.

6 pack 2-3/8" (58mm) Tension Rods.

6 pack 1-3/8" (35mm) Tension Rods.

Double 7/8" dia. receptacle.

Single 7/8" dia. receptacle.

Double 7/8" dia. arms joined by a multi-angle ratchet adjustment.

All-in-one, ready-to-go hex rod tom arm with ABS ball with adjustable angle mounted on a 7/8" dia. vertical post. Recommended for use with various manufacturers’ rack systems or original manufacturers’ tom platform mounts.

Gibraltar’s exclusive “Ultra Adjust" system adds additional flexibility to a standard 7/8" dia. tom arm. Recomended for use with various manufacturers’ rack systems.

Same specifications as the SC-78UA with a longer vertical shaft. Recomended for use when mounting in SC-670BB or original manufacturer’s bass drum mount.

4 pk. Sleeves fit over threaded portion of cymbal mount to protect cymbals.

Attaches to stand to provide top or bottom mounting. Use with other accessory holders to expand mounting possibilities.

Holds up to eight accessories top or bottom. Use with other accessory holders (SC-CA, SC-WCA, etc.) to expand mounting possibilities.

Ash Tray - Ash Tray clamps quickly to any drum stand.

All-in-one, ready-to-go 7/8" dia. tom arm with ABS base with adjustable angle mounted on a 1/2" dia. vertical post. Recommended for use with various manufacturers’ rack systems.

Same mount as SC-BA78 with longer vertical arm. Recommended for use when mounting in SC-670BB or original manufacturers’ bass drum mount.

All-in-one, ready-to-go hex rod tom arm with ABS ball with adjustable angle mounted on a 7/8" dia. vertical post. Recommended for use with various manufacturers’ rack systems or original manufacturers’ tom platform mounts.

Similar to the SC-BALRM except L-rod is 12.7mm dia.

All-in-one, ready-to-go 10.5mm L-rod with ABS base with adjustable angle ball, mounted on 7/8" dia. vertical post.

Snare Stand - Features a fully adjustable 360° snare basket. Elliptical leg base is perfect for a tight drum setup. Revised lower base assembly allows this stand to be set as low as 18" in height.

Extended Height Snare Stand - Features 360° snare basket positioning system. Holds drums 12" to 15" in diameter up to 4.5" in height. Possibly the best concert snare stand on the market.

(18" to 26")

(18" to 26")

(18" to 26")

(18" to 26")

Medium Boom Cymbal Stand - Medium 20" boom with 2-point boom adjustment mechanism. Includes streamlined counterweight for better weight distribution and a 3 -tier height adjustment.

Mini boom Cymbal Stand - One of the best cymbal boom mechanisms on the market featuring tight gripping and easy-to-adjust cymbal positioning. Hinged, 2-point adjustment mechanism will give years of non-slip, no-problem use.

Cymbal Stand - Straight cymbal stand with a 3-tier height adjustment. Extends to a full 5' in length and collapses to only 3'.

Holds two hand-held concert cymbals (up to 22" in diameter) for easy and quick access

Includes 24" x 24" padded fiberglass percussion table and a 2-tier stand with an elliptical leg base assembly.

Professional bongo stand which easily accommodates most bongo makes and designs. Bongos mount via a locking clip system that adjusts to fit most bongos. This stand features a 2-tier stand with elliptical leg base.

Snare Drum Stand With Extra Low Drum Height Adjustment - The 9506 features a snare drum basket with 360' snare position adjustment and a memory/position lock. Fits snare drums from 12' to 15' in diameter and can be lowered to 18' in height.

Hi-Hat Cymbal Holder - With adjustable cymbal tension and SC-PUGC multi clamp.

(20" to 28")

Comes with Gibraltar's exclusive "Thigh Cutout System" (20" to 28")

(20" to 28")

(20" to 28")

(16" to 24")

Short Boom Cymbal Stand - Short 18" boom with 2-point adjustment, 3-tier height adjustment mechanism, and 360° cymbal tilter mechanism.

This is one of the most versatile cymbal stands on the market. It's perfect for any set up and will save set up time and reduce the overall weight of your hardware case.

Medium Boom Cymbal Stand - Medium 20" boom with 2-point adjustment mechanism and streamlined counterweight for better weight distribution, 3-tier height adjustment, and 360° cymbal tilter mechanism.

Mini Boom Cymbal Stand - Mini diameter 18" knurled boom which doubles as a straight cymbal stand, 3-tier height adjustment.

Short Boom Cymbal Stand - Short 18" boom with 2-point adjustment, 3-tier height adjustment mechanism, and 360° cymbal tilter mechanism.

Straight Cymbal Stand - Same basic specifications as the 9510 cymbal stand with our heavy-duty conventional tilter and 3-tier height adjustment.

Gibraltar's low profile parallel, double-braced leg base. This allows mounting of either toms or suspended floor toms. It also includes an extra multi fitting for additional mounting of cymbals or drums.

Gibraltar's low profile parallel, double-braced leg base. This allows mounting of either toms or suspended floor toms. Includes an extra multi fitting for additional mounting of cymbals or drums. It has a 360° adjustment with 10.5mm knurled L-Rods.

Deluxe professional stand mounts inside the bongo drum for Rock Solid "no movement" support. Mounts stay inside of bongos and attach easily to stand with oversized Gibraltar wing screws.

Designed to fit most congas which utilize an L-bracket mounting system. Our 9517 Double Stand features a heavy-duty mounting assembly, adjustable drum position guides, and a memory/position lock (for consistent height adjustment).

PEARL 14 x 14 VMX Floor Tom

Straight Cymbal Stand - With 360° cymbal tilter mechanism and 3-tier height adjustment, extends to a full 5'8" and collapses to less than 3'.

Includes; (2) 20" bars for T-Legs; (2) 36" vertical bars, (1) 43.5" horizontal bar; (2) GPRTL; (2) GPRTC; (2) GPRMC; (4) GPRML clamps; and (2) 4425B-1 cymbal boom arms, which mount into the two 36" vertical bars via two RBA rack boom attachments.

Mini diameter 18" knurled boom with geared 8mm cymbal tilter and 3-tier base assembly.

New-14" snare with case, practice pad, stand, and sticks

The 9519 will add strength and rigidity to any timbale set. This stand features a height position lock, a 3 point locking system for the bell holder, drum insolation pads, and a clip mounting system which mounts below the rim of the timbales.

Dual spring hi-hat with adjustable pedal board height and extrememly smooth action.

Gibraltar "Liquid Hat" provides completely balanced action. Dual chain with hardened U-joint drive system will provide years of smooth and accurate performance.

Control on the up and down stroke for total response w/ Rock Plate.

Single spring hi-hat with rotatable base assembly. For years Gibraltar's No. 1 selling hi-hat. A simple, easy to use, great feeling hi-hat.

For drummers who lead with their left foot. Uses the same specifications as ADP. All key adjustments and the primary beater assembly are moved to the left.

Cam drive pedal with adjustable beater angle/pedal board height that does not effect spring tension. All Avenger pedals utilize a dual chain drive.

Elliptical Leg Throne Base Backrest Height range: 18" to 26"

Round Vinyl Seat

Double-Braced Extended Height Throne Base Height range: 24" to 32"